CZ/SK verze

Can Australia Avoid Europe’s ETCS Fragmentation? NTC Puts First Mandatory Standard to Industry

Can Australia Avoid Europe’s ETCS Fragmentation? NTC Puts First Mandatory Standard to Industry
photo: Správa železnic/Illustrative photo
26 / 10 / 2026

How do you bring Europe’s train control system into one of the world’s most fragmented rail environments without importing Europe’s own problems with it? Australia is preparing its first mandatory national ETCS standard, with the National Transport Commission now asking the industry whether the proposed rules can actually deliver one interoperable system across the country.

The draft National European Train Control System (ETCS) Mandatory Standard was the subject of an NTC webinar last week. More than 200 participants joined the session, which covered the technical requirements, the future governance of ETCS in Australia and what the change will mean for existing networks.

Australia Wants One ETCS, Not Several Local Versions

Australia’s railways have long been split between different state networks, technical requirements and operating practices. Under the National Rail Action Plan, the NTC is trying to reduce some of those differences, particularly where trains need to move between networks.

In August 2025, Australian infrastructure and transport ministers agreed that ETCS would become the digital signalling pathway for the National Network for Interoperability, or NNI. Future digital train control systems introduced on that network will have to comply with national ETCS requirements.

The draft published on 7 October 2026 is Australia's first proposed mandatory national ETCS standard. It covers both trackside and onboard systems, rather than separating them into two different standards as originally planned.

NTC chief executive Michael Hopkins said the move towards mandatory standards reflects frustration with the existing opt-in approach. Australia has had national standards before, but networks have retained considerable freedom over whether and how they use them.

The new framework is much more direct. Tier 1 contains mandatory requirements where interoperability and safety depend on national consistency. Tier 2 will contain harmonised standards intended to reduce differences between networks, while Tier 3 leaves room for local requirements where national interoperability is not affected.

Baseline 4, Level 2 and a Route Towards FRMCS

The Australian draft takes its technical requirements directly from Appendix A of the European Control-Command and Signalling TSI. The starting point is ETCS Baseline 4 Release 1, the current European specification set.

Stephen Lennon, Executive Director for Rail Systems and Operations Reform at the NTC, said the proposed standard uses system version 2.1 for trackside installations. Onboard equipment would need system version 2.1 as a minimum and support for newer functionality.

An ETCS baseline and an ETCS system version are not the same thing: the system version defines which mandatory ETCS functions must work between the train and trackside equipment. For trackside installations, ETCS Level 1 would be the minimum. Trains fitted for the NNI would need Level 2 onboard capability. The idea is to give infrastructure managers some flexibility while avoiding a situation where trains need repeated equipment changes as they move around the country.

The draft also looks beyond GSM-R. Europe is preparing the move towards the Future Railway Mobile Communication System, or FRMCS, and Baseline 4 already contains specifications designed to support that transition.

Australia is not proposing an immediate migration to FRMCS. Instead, the standard is intended to stop today's investments from creating another expensive technology problem a few years from now.

Europe Provides the Standard, and a Warning

Europe has spent years trying to replace national signalling systems with ERTMS, yet differences between countries and individual projects remain a serious problem. A European Commission study published on 1 October 2026 found that fragmented deployment practices, legacy national rules and project-specific requirements are major reasons why ERTMS projects remain expensive and complex. In many cases, suppliers still have to develop tailor-made solutions instead of deploying the same standardised product repeatedly.

Only around 10% of the trans-European rail network has so far been equipped with ERTMS, according to the Commission, while completing trackside deployment is estimated to require another EUR 75–85 billion.

That experience explains much of what Australia is trying to avoid. The NTC repeatedly returned to the need to stay close to the European specification and resist unnecessary Australian variations. For suppliers in particular, a national system based on established international requirements should be easier to work with than another collection of state-specific solutions.

At the same time, simply copying European technical documents will not make Australia's railways interoperable. The operating environment, legislation and institutional structure are different, so the European requirements still need an Australian framework around them.

Australia Does Not Want to Copy Europe’s Certification Bureaucracy Either

The European system comes with its own assurance structure, including assessment bodies commonly known as AsBos, NoBos and DeBos. Australia does not intend to reproduce that structure directly. Instead, the draft tries to recognise European certification where it can while fitting ETCS assurance into Australia's existing Rail Safety National Law. Lennon said the aim is to avoid testing or certifying the same product again where equivalent evidence already exists.

Independent safety assessors already used by Australian railway projects could perform part of the role, while rail infrastructure managers would remain responsible for demonstrating that an integrated ETCS system is suitable for their own network. This is another area where the NTC says it has taken advice from Europe. 

What Happens to Existing ETCS and Other Signalling Systems?

The proposed standard is not retrospective. Existing ETCS projects in Australia would not suddenly need to be rebuilt to comply with the new document. However, future stages, upgrades and new deployments on the NNI would be expected to use it.

The same approach applies to networks that have already selected another technology. During the webinar, participants asked specifically about Perth, where the Public Transport Authority is deploying CBTC.

The NTC said the standard would not force Western Australia to replace that decision with ETCS. Only a relatively small part of the PTA network forms part of the NNI, and trains without CBTC can continue to be managed through the interoperability arrangements developed for that section.

What the national standard does change is the other side of the equation. If an ETCS-equipped interstate train reaches that network in future, PTA should know exactly what ETCS configuration it is dealing with. RISSB is meanwhile preparing the Tier 2 standards that will sit beneath the mandatory requirements. Mark Smith told the webinar that future work could cover areas such as operational rules, signalling principles and guidance for infrastructure that is renewed before ETCS arrives.

Tags